服务热线
020-85250202
omega 卫生热电偶传感器，带一体式电缆 标准探头设计： Standard Duty ¼" Probe Design TCS-TU-S-0300-D1-CB-120 3" Probe, Type "T" Thermocouple TCS-TU-S-0400-D1-CB-120 4" Probe, Type 'T" Thermocouple TCS-TU-S-0500-D1-CB-120 5" Probe, Type "T" Thermocouple TCS-TU-S-0600-D1-CB-120 6" Probe, Type "T" Thermocouple TCS-JU-S-0300-D1-CB-120 3" Probe, Type "J" Thermocouple TCS-JU-S-0400-D1-CB-120 4" Probe, Type "J" Thermocouple TCS-JU-S-0500-D1-CB-120 5" Probe, Type "J" Thermocouple TCS-JU-S-0600-D1-CB-120 6" Probe, Type "J" Thermocouple Heavy Duty 3/8" to 3/16" Probe Design TCS-TU-H-0300-D1-CB-120 3" Probe, Type "T" Thermocouple TCS-TU-H-0400-D1-CB-120 4" Probe, Type "T" Thermocouple TCS-TU-H-0500-D1-CB-120 5" Probe, Type "T" Thermocouple TCS-TU-H-0600-D1-CB-120 6" Probe, Type "T" Thermocouple TCS-JU-H-0300-D1-CB-120 3" Probe, Type "J" Thermocouple TCS-JU-H-0400-D1-CB-120 4" Probe, Type "J" Thermocouple TCS-JU-H-0500-D1-CB-120 5" Probe, Type "J" Thermocouple TCS-JU-H-0600-D1-CB-120 6" Probe, Type "J" Thermocouple
In addition to the standard 1½-16AMP process connection, these can be provided in the following sizes and styles:
If you need a process connection that is not listed above, please contact our sales department for availability.
The probe stems are manufactured in two configurations; standard ¼" diameter probe for standard duty service, and a stepped 3/8" to 3/16" diameter probe design for good response times in heavy duty applications.
The integral cable with molded strain relief allows for easy and direct connection to your instrumentation. These sensors are also available in RTD and Thermistor styles to accommodate any process input requirement. In addition to the standard 1½-16AMP flange design, these can be provided in a wide variety of flange sizes and styles. If you need something a little (or a lot) different, we can accommodate your needs.
Food process hygienic temperature sensors can be used to aid food safety inspection compliance and verification of time temperature control. Combined with a chart recorder model CTXL you can temperature monitor a CCP ( Critical Control Point) or sanitation time and move toward a HACCP (Hazard Analysis Critical Control Point) compliance plan.
This sensor is stocked with Type "T" or Type "J" Thermocouples standard, but are available in any thermocouple type:
产品描述
The OMEGA™ TCS-S-CB and TCS-H-CB Series Thermocouple Sensors are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries. These sensors are manufactured with 316L stainless steel housings that meet the dimensional requirements of the ASME BPE-2007 Standard, and are welded and processed to provide a clean, smooth, 32 µinch or better surface finish in the wetted areas for easy cleaning.In addition to the standard 1½-16AMP process connection, these can be provided in the following sizes and styles:
| Process Connection | Model Number Code |
|---|---|
| 3/4"-16AMP | -B1- |
| 1" and 1½"-16AMP | -D1- |
| 2"-16AMP | -E1- |
| 2½"-16AMP | -F1- |
| 3"-16AMP | -G1- |
| 4"-16AMP | -H1- |
If you need a process connection that is not listed above, please contact our sales department for availability.
The probe stems are manufactured in two configurations; standard ¼" diameter probe for standard duty service, and a stepped 3/8" to 3/16" diameter probe design for good response times in heavy duty applications.
The integral cable with molded strain relief allows for easy and direct connection to your instrumentation. These sensors are also available in RTD and Thermistor styles to accommodate any process input requirement. In addition to the standard 1½-16AMP flange design, these can be provided in a wide variety of flange sizes and styles. If you need something a little (or a lot) different, we can accommodate your needs.
Food process hygienic temperature sensors can be used to aid food safety inspection compliance and verification of time temperature control. Combined with a chart recorder model CTXL you can temperature monitor a CCP ( Critical Control Point) or sanitation time and move toward a HACCP (Hazard Analysis Critical Control Point) compliance plan.
This sensor is stocked with Type "T" or Type "J" Thermocouples standard, but are available in any thermocouple type:
| Thermocouple Type | Positive/Negative Conductors | Color Code (Red is Negative) |
|---|---|---|
| Type T | Copper/Constantan | Blue/Red with Brown Jacket |
| Type E | Chromel/Constantan | Purple/Red with Brown Jacket |
| Type K | Chromel/Alumel | Yellow/Red with Brown Jacket |
| Type J | Iron/Constantan |
关键词: omega卫生热电偶传感器