服务热线
可以方便，精确地探测和计量底部沉降污泥，深度误差5%，适合各种液体，应用于污水处理厂，化工厂，食品厂以及各种需要精确观察固液体分离情况场合。品牌：美国NASCO推荐行业：煤矿，地质勘探，污水处理厂，化工厂食品厂等 NASCO污泥取样棒专门为采取可沉淀固体的精确读数，固体含量≤5%，可用于各种液体，任何深度。适用于污水处理厂，化工厂和食品加工厂等任何需要测量精确可沉淀物样品水平的地方。具有耐腐蚀性。每英尺可采取样品3盎司（89ml/0.31m）。 不能用于温度超过165℉（74℃）的液体中，不能经受压热器的作用。 使用方法： 1、慢慢地把污泥取样棒沉到水槽底部。 A、浮阀打开，使得物质流入。当污泥取样棒达到水槽底部并且管内物质已填充到表面水平，轻微地拖住绳子提起取样棒。 B、关上止逆伐，封闭管内的混合物。 2、当污泥取样棒完全从液体中取出来之后，可以直接从管面上标记的符号读出固体样品的数量。释放管内物质，只要按住底部的栓，就可以打开止逆阀排出样品。
相关型号： C09247WA:套装，15-ft.（4.60m） C09249WA:取样棒袋子； 单独部分： C09250WA：带阀底部，5-ft.（1.53m）; C09251WA:中间延伸部分，5-ft.（1.53m）; C09252WA:带绳顶部。
Do NOT use for sampling ethanol or ethanol blended fuel. Use Nasco fuel sampler (B01477). The Sludge Judge® is designed to take accurate readings of settleable solids, 5% or less, in a variety of liquids, to any depth. It is ideal for sewage treatment plants, chemical plants, and food processing facilities - anywhere that accurate sample levels of settleable solids in noncaustic materials are needed. The unit holds approximately 3 oz. per foot (89 ml per 0.31 m). The Sludge Judge® comes in 5 ft. (1.53 m) sections of 3/4 in. (1.90 cm) plastic pipe with screw-type connectors. The top section includes a nylon rope for raising and lowering the sampler. Individual sections can be combined as required to achieve the length needed. Do not use in liquids over 165° F (74° C). Sludge Judge® is not autoclavable. A convenient cotton canvas carrying case that holds four sections, a cleaning brush, cleaning rod, and cotton strips are available. To use: 1. Slowly lower the Sludge Judge® to the bottom of the tank. The float valve opens (see figure A), allowing materials to flow in. When the bottom has been reached and the pipe has filled to the surface level, tug slightly on the rope as the unit is raised. This sets the check valve(see figure B), trapping the mixture inside. 2. When the unit has been raised clear of the liquid, the amount of solids in the sample can be read using the 1 ft. (0.31 m) increments marked on the pipe sections. To release the material in the unit, touch the pin extending from the bottom section against a hard surface. This opens the check valve to drain the sample. One-year warranty. 关键词: 取样管
相关型号： C09247WA:套装，15-ft.（4.60m） C09249WA:取样棒袋子； 单独部分： C09250WA：带阀底部，5-ft.（1.53m）; C09251WA:中间延伸部分，5-ft.（1.53m）; C09252WA:带绳顶部。
Do NOT use for sampling ethanol or ethanol blended fuel. Use Nasco fuel sampler (B01477). The Sludge Judge® is designed to take accurate readings of settleable solids, 5% or less, in a variety of liquids, to any depth. It is ideal for sewage treatment plants, chemical plants, and food processing facilities - anywhere that accurate sample levels of settleable solids in noncaustic materials are needed. The unit holds approximately 3 oz. per foot (89 ml per 0.31 m). The Sludge Judge® comes in 5 ft. (1.53 m) sections of 3/4 in. (1.90 cm) plastic pipe with screw-type connectors. The top section includes a nylon rope for raising and lowering the sampler. Individual sections can be combined as required to achieve the length needed. Do not use in liquids over 165° F (74° C). Sludge Judge® is not autoclavable. A convenient cotton canvas carrying case that holds four sections, a cleaning brush, cleaning rod, and cotton strips are available. To use: 1. Slowly lower the Sludge Judge® to the bottom of the tank. The float valve opens (see figure A), allowing materials to flow in. When the bottom has been reached and the pipe has filled to the surface level, tug slightly on the rope as the unit is raised. This sets the check valve(see figure B), trapping the mixture inside. 2. When the unit has been raised clear of the liquid, the amount of solids in the sample can be read using the 1 ft. (0.31 m) increments marked on the pipe sections. To release the material in the unit, touch the pin extending from the bottom section against a hard surface. This opens the check valve to drain the sample. One-year warranty. 关键词: 取样管